Water Softener Salt Tablets

Water Softener Salt Tablets  (sodium tablets). The tablet is manufactured from non iodized, extra-fine, crystallized salts of high level of purity which is used to regenerate neutral pH of ion exchange materials. It has use in the following areas:

1. Medicine
- hemodialysis
- steam-sterilization
- lab

 2. Thermal power plants

3.  Process and manufacturing industry

4.  Consumer goods (dishwasher)

 APPLICATION SALT TABLETS AND BENEFITS OVER OTHER INDUSTRIAL SALTS IN THE PREPARATION OF WATER

Regeneration of ion exchange resins is done by passing salt solution through the resin saturated with Ca2 + and of Mg2 + ions. Small Immersion in salt water gets too high concentration of the solvent, resulting in uneven resin regeneration or unreasonably increased consumption in salt and waste water contamination. Immersion in salt water tablets obtained by salt solution of appropriate concentration. The solubility of salt in tablet form is several times lower than in the small, allowing uniform and gradual replacement of Ca2 + ions and of Mg2 + ions, Na + salt by passing solution through the resin. Thus improving the quality of regeneration of ion exchange resins, and prevent “poisoning” resin as impurities always present in bulk industrial salt, and uncontrolled over-concentration of Na + ions from the salt solution.

Based on data obtained during tests realized in the industrial exploitation of the following comparative advantages of salt tablets in comparison to bulk industrial salt:

1. Salt consumption is reduced 30-50%
2. The concentration of salt solution which is passed through the exchanger is controlled, and thus met all technical and environmental requirements.
3. Incremental costs of directly transport, handling and storage are twice as small.
4. The durability of ion exchange resins are twice as likely.
5. Water consumption during the regeneration of up to 35% less.
6. Since the content of substances insoluble in water in bulk industrial salt has 1.2%, and salt that is tablet has 0.05%, technical maintenance of the system in case of use of salt tablets is much simpler and cheaper (cleaning pumps, nozzles, etc.) and accidents that occur due to impurities in the salt are practically eliminated.
7. Workers who manipulate with salt are protected from dust sone, which is always present and pollute your workspace while working with the bulk salt.

TECHNICAL CATALOGUE

SALT TABLETS (NaCl)

Organoleptic characteristics:
Appearance: Tablets
Color: White
Odor: odorless

Physico-chemical characteristics:
Dimensions: 8 x 20 mm
Weight: 3.5 g ± 0.01 g
Disintegration at 37°C: min. 9 minutes
The content of NaCl: 99.05% m/m
Moisture content at 105°C: 0.01% m/m
Content of substances insoluble in water: <0.001% m/m
The content of sulfates as SO: 0.15% m/m
The content of Ca and Mg, expressed as Ca: 0.0056% m/m
The content of Fe: <0.001% m/m

PH value of aqueous solution of 50 g/L at 20°C: 7.5
It does not contain E536
Corresponds the SRPS H.G2.099:1997 standard.

The conditions of storage and transportation:
■ temperature to 20 ° C
■ relative air humidity to 85%

PACKAGES